Sonde Balboa M7 (12 pouces)
Prix :31,31 €
Code de l'article : SN-BA103
Disponibilité : More than 100 in stock
Détails
| Type de Produit: | Sensor probe |
| Fabricant: | Balboa |
| Les liaisons: | The probe slides into the holder and is secured by a plastic nut. The flat plastic 2-pin plug plugs straight onto the PCB. |
| Dimensions: | Diamètre de la sonde de température: 6 mm Diamètre de la sonde haute limite: 6 mm Longueur de câble de temp: 305mm or 12 inches Longueur de câble haute limite: 305mm or 12 inches |
| Généralement Utilisé Avec: | Balboa GS/GL Series such as GS501Z/GL2000 etc. but not GL8000. All order systems would use the longer 24 inches cable. Also used more recently on the Balboa BP series such as BP601 and BP2100. These sensors are also used on the Balboa Revolution series because of the shorter cable. |
| Notes Complémentaires: | If the sensor you are replacing has a longer cable i.e. 24 inches be sure to order the longer cable version instead otherwise it won't stretch to the place where it needs to plug in.All M7 sensors are calibrated the same, be it long or short or if they have different numbers etc. so you just need to decide if it is the long cable or short cable you require. |
Articles connexes
Les articles ci-dessous peuvent également vous intéresser :
