Réchauffeur Balboa 3KW M7 avec écrous de serrage (GS-GL)
Prix :164,75 €
Code de l'article : HT-BST31
Disponibilité : 39 en stock
Détails
Type de Produit: | Heater assembly |
Fabricant: | Balboa |
Puissance: | Volts: 230 Hz: 50 KW: 3.0 Ampères: 11.5-12.0 HP: |
Caractéristiques: | Sensor compatibility: M7 24" x 2Material spec: IncoloyRequired flow rate: 21gpmFlow detection: M7 Technology by using a sensor at each end of the heater assembly |
Compatible Avec: | GS500, GS500Z, GS501, GS501Z (with 3.0KW on label only), GS501SZ, GS510, GS510S, GS510Z, GS510SZ, GS511SZ, GS523DZ, GL2000 mach 3, GL2001 mach 3 and more |
Connexions et Fixtations: | Usually held in with two fixing studs, one at the top and one underneath. 2" white plastic female sockets to connect to plumbing |
Dimensions: | Longueur: 381 mm Diamètre: 50.8 mm Entre les terminaux: 31.75 mm Longueur totable complète: 495.3 mm |
Notes Complémentaires: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Articles connexes
Les articles ci-dessous peuvent également vous intéresser :