Réchauffeur LX H30-R1 3.0KW 2" sans câble de débit (droit)
Prix :130,92 €
Code de l'article : HT-LX324
Disponibilité : 7 en stock
Détails
| Type de Produit: | Heater assembly |
| Fabricant: | LX |
| Puissance: | Volts: 230 Hz: 50 KW: 3.0 Ampères: 13.6 HP: |
| Caractéristiques: | Sensor compatibility: Controlled by the system control boxMaterial spec:Required flow rate: Set by pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not workFlow detection: Pressure switch built-in |
| Compatible Avec: | Most Chinese spas with a small plumbing change or can be used as a remote heater on a bespoke project |
| Connexions et Fixtations: | 2 inch white plastic female sockets to connect to plumbing |
| Dimensions: | Longueur: Diamètre: 63 mm Entre les terminaux: 120 mm Longueur totable complète: 340 mm |
| Notes Complémentaires: | Compatible with most of the Chinese Hot Tubs with a slight change of plumbing or can be used on a bespoke project. High limit thermal cutout built in. This unit is rated IPX5 and has CE approval. |