Réchauffeur 1,5" 1,5kW "Flow Thru"
Code de l'article : HT-TH016
Disponibilité : Retiré
Détails
Type de Produit: | Heater assembly |
Fabricant: | Thermcore |
Puissance: | Volts: 230 Hz: 50 KW: 1.5 Ampères: 5.0-6.0 HP: |
Caractéristiques: | Sensor compatibility: Material spec:Required flow rate: Set by pressure switchFlow detection: No pressure switch supplied with the heater |
Compatible Avec: | Hot Tubs: Part Codes: c2150-0121/ 39902 |
Connexions et Fixtations: | Usually held in with a metal fixing studs at the top of the heater either side of the main heat terminals. Hi limit sensor pouch on the underside. 1.5" white plastic female sockets to connect to plumbing |
Dimensions: | Longueur: 215.9 mm Diamètre: 50.8 mm Entre les terminaux: 25.4 mm Longueur totable complète: 292.1 mm |
Notes Complémentaires: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Thermcore, Aquatemp or Balboa product with genuine labelling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Articles connexes
Les articles ci-dessous peuvent également vous intéresser :