3kw Vita Spa Flow Thru Heater C2300-0010ET

Prix :408,34 €

Code de l'article : HT-VI010

Disponibilité : 4 en stock



3kw Vita Spa Flow Thru Heater C2300-0010ET

Détails

Type de Produit: Heater assembly
Fabricant: Thermcore
Puissance: Volts: 230
Hz: 50
KW: 3.0
Ampères:
HP:
Caractéristiques: Material spec: Incoloy
Required flow rate: Set by pressure switch
Flow detection: No pressure switch supplied with the heater
Compatible Avec: Hot Tubs: Vita Spas
Part Codes: C2300-0010ET
Connexions et Fixtations: Usually held in with a metal fixing studs at the top of the heater either side of the main heat terminals. Hi-limit sensor pouch on the topside. 2 inches white plastic female sockets to connect to plumbing
Dimensions: Longueur: 444.5 mm
Diamètre: 50.8 mm
Entre les terminaux: 31.75 mm
Longueur totable complète:
Notes Complémentaires:

Can be used to replace HT-TH21U (C2300-1008ET)

You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Thermcore, Aquatemp or Balboa product with genuine labelling do not buy it.

If your heater looks the same as this one it most probably is but contact us if you need further help.