Réchauffeur LX H30-R2 3.0KW 1.5" sans câble de débit (forme en L)
Prix :114,29 €
Code de l'article : HT-LX322
Disponibilité : 50 en stock
Plus de vues
Détails
| Type de Produit: | Heater assembly |
| Fabricant: | LX |
| Puissance: | Volts: 230 Hz: 50 KW: 3.0 Ampères: 13.6 HP: |
| Caractéristiques: | Sensor compatibility: Controlled by the system control boxMaterial spec:Required flow rate: Set by pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not workFlow detection: Pressure switch built-in |
| Compatible Avec: | Most Chinese spas with a small plumbing change or can be used as a remote heater on a bespoke project |
| Connexions et Fixtations: | 1.5 inch white plastic female sockets to connect to plumbing |
| Dimensions: | Longueur: Diamètre: 50 mm Entre les terminaux: Longueur totable complète: |
| Notes Complémentaires: | This unit replaces the Rooster heater as they kept failing. This heater is longer than the Rooster so you may need to alter the plumbing slightly High limit thermal cutout built in. This unit is rated IPX5 and has CE approval. |
Articles connexes
Les articles ci-dessous peuvent également vous intéresser :
