Réchauffeur Balboa 3KW M7 avec écrous de serrage (GS-GL)

Prix :164,75 €

Code de l'article : HT-BST31

Disponibilité : 3 en stock



Réchauffeur Balboa 3KW M7 avec écrous de serrage (GS-GL)

Détails

Type de Produit: Heater assembly
Fabricant: Balboa
Puissance: Volts: 230
Hz: 50
KW: 3.0
Ampères: 11.5-12.0
HP:
Caractéristiques: Sensor compatibility: M7 24" x 2
Material spec: Incoloy
Required flow rate: 21gpm
Flow detection: M7 Technology by using a sensor at each end of the heater assembly
Compatible Avec: GS500, GS500Z, GS501, GS501Z (with 3.0KW on label only), GS501SZ, GS510, GS510S, GS510Z, GS510SZ, GS511SZ, GS523DZ, GL2000 mach 3, GL2001 mach 3 and more
Connexions et Fixtations: Usually held in with two fixing studs, one at the top and one underneath. 2" white plastic female sockets to connect to plumbing
Dimensions: Longueur: 381 mm
Diamètre: 50.8 mm
Entre les terminaux: 31.75 mm
Longueur totable complète: 495.3 mm
Notes Complémentaires:

You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it.

If your heater looks the same as this one it most probably is but contact us if you need further help.

Articles connexes

Les articles ci-dessous peuvent également vous intéresser :