Bonde d'aspiration inox 2" 200GPM

Prix :33,74 €

Code de l'article : PL-10506

Disponibilité : 33 en stock



Bonde d'aspiration inox 2" 200GPM

Détails

Type de Produit: Suction
Fabricant: Waterway
Caractéristiques: 2" S - Stainless Steel
Référence de taille la plus commune: 2 inch
Dimensions: Diamètre extérieur de la face: 127 mm
Hauteur extérieure sur le visage: 140 mm
Longueur totale:
Diamètre Intérieur: 61 mm
Convient à la taille du trou: 85 mm
Généralement Utilisé Avec: 2 inch rigid pipe and 2 inch flexible rigid pipe.
Notes Complémentaires:

Optimum flow rate: 200 gallons per minute. When using a specific suction you should take into account the required flow intake for the pump you will be plumbing to and also the heater. On ALL systems it is required by BISHTA standards to install 2 suctions per pump to avoid entrapment and or disembowelment.

Best to use a plumbing cleaner then pipe cement to assemble. Pipework pushes inside this part at the female end.

Assemble through the spa shell with silicone, you can use a gasket instead of the silicone but not both together as this often causes the gasket to spurge out the side and would cause a leak.